|
 |
PSW412 - RRP: $399 | Now $149 each
12” ALPHA 400 SERIES SUBWOOFER
• Heavy Gauge Stamped Steel Chrome Plated “Alpha” Basket
• Motor Assembly Heat Sink
• High Rigidity Inverted Dome Mineral-Filled Composite Cone
• EPDM Surround for Enhanced Control at Extreme Temperatures
• Flat Progressive Rate Nomex® Damper w/ Spiral-Woven Leads
• 8-Gauge Lug-Lock Input Terminals
|
|
• Rated at 500 Watts RMS
• 91dB Efficiency
• Frequency Response of 25Hz to 500Hz
• 46 oz. Double-Stacked Magnet
• Dual 4-ohm 2” Voice Coils
• Mounting Dimensions —
Depth: 6”
Through Hole: 11 1/8”
Diameter: 12 7/8” |
|
|
|
PSW112C - RRP: $249 | Now $99 each
12” ALPHA 100 SERIES SUBWOOFER
• Heavy Gauge Stamped Steel Chrome
Plated “Alpha” Basket
• Motor Assembly Heat Sink
• Laminated Non-Pressed Pulp Paper Cone
• U.V. Treated Pressure Molded Foam Surround
• 8-Gauge Lug-Lock Input Terminals
|
|
• Rated at 230 Watts RMS
• 93dB Efficency
• Frequency Response of 30Hz to 500Hz
• Dual 4-ohm 1 1/2” Voice Coils
• Mounting Dimensions:
Depth: 5 1/8”
Through Hole: 11 1/4”
Diameter: 12 1/2” |
|
|
|
DAB1800X - RRP: $699 | Now $249 each
1 Channel Digital Monoblock
800w RMS @ 4 Ohms
1600w RMS @ 2 Ohms
• PWM MOSFET Power Supply
• 1 channel operation
• THD: 0.02%
• 4 - way Protection Circuitry: Thermal, Short Curcuit, Overload & DC Offset
|
|
• S/N Ratio: >100dB (+/- 1dB)
• Frequency Response: 10Hz - 40kHz
• Variable 18dB Hi-pass Crossover: 55Hz - 4.2kHz
• Variable 18dB Low-pass Crossover: 35Hz - 155Hz
• Bass Boost: 0 - 18dB
• Rail Illumination
• 4 Gauge Power Connection
• Brushed Aluminum Finish with Diamond - Cut Heat SInk
|
|
 |
|
WARNING!!Extreme Performance
(THIS JBL STOCK STILL MADE IN USA)
|
JBL W10GTi- RRP: $799 | Now $499 each
600w RMS / 3000w Peak
•Differential Drive Design (DDD) motor
• Die-cast vented basket
• Kevlar®-impregnated paper woofer cone
• Nitrile-butylene surround
• Dual 6-ohm voice coils
• Warranty - Three Years |
|
• Sensitivity - 90dB @ 2.83V/1m
• Frequency Response - 20Hz ~ 1kHz
• Impedance - 3 or 12 Ohms
• Voice-Coil Diameter - 3" (76mm)
• Mounting Depth - 9-1/8" (232mm)
• Overall Diameter - 10-1/2" (267mm)
• Cutout Diameter - 9-3/16" (233.4mm)
• Displacement - 0.108 ft3 (3.06 l) |
|
